Introduction to Singapore PSB Certification
The CONTROL LED GOODS issued by the Singapore Industry and Commerce Bureau must meet the safety standards. Singapore's Consumer Protection (Safety Specifications) Registration Scheme also has this requirement.
Before entering Singapore, the line number of the taxable company in Singapore must be the holder of the PSB application. (The company provides Singaporean business and can be the holder of the PSB certificate when applying for the PSB certification.) Products can not be sold in Singapore until they have obtained PSB.
Productivity and Standard Board of Singapore. A. The certificate holder is the company name of the local company in Singapore, without factory inspection and annual fee. B. The validity period of the certificate is three years. C. If the product has Plug, SS246 test certification report d, product certification without "series" application (each certificate can only cover a single model)
1. Singapore voltage is AC230V/50Hz 2. Certificate holder should be a local registered representative company.
Certification: Safety labels should be placed on products
Document requirements: security testing;
CB certificates and test reports valid for three years (English only)
All reports issued by PSBCorporation or accredited testing laboratories in accordance with Singapore standards
Report issued by an independent laboratory recognized by the Singapore Laboratory Recording System
2. Additional Documents
Information on local representatives in Singapore
Letter of Authorization for Security Regulation Application in Singapore (Letter from Singapore Local Representative Company)
If the holder of CB certificate is different from the local representative company in Singapore, the holder of CB certificate must present an authorization letter.
Complete circuit/circuit diagram (including rated value) and part list (preferably size A3)
English Manual
Original scroll labels or clearly visible color photographs
Colour Appearance and Internal Photos
The Singapore Standard Productivity and Reform Commission (Spring Singapore) is a product safety agency established by Singapore's Ministry of Trade and Industry, which is responsible for consumer protection (product safety requirements) registration scheme (CPS scheme for short). On April 1, 2002, Consumer Protection Regulation No. 1991 was replaced by Consumer Protection Regulation No. 2002. According to the new regulations, the conformity of product safety should be based on the test and evaluation of third-party certification bodies. At present, 45 categories of products belong to compulsory certification products of control category.
Certified Product Catalogue
Forty-five categories of products with mandatory safety certification in Singapore：
1.Cookingrange
2.Hairdryer
3.Electriciron
4.Microwaveoven
5.Television/videodisplayunit
6.Videocassetterecorder
7.ComponentsoftheLPGgassystem(Hose,RegulatorandValve)
8.Gascooker
9.Roomair-conditioner
10.Tableorstandingfan
11.High-fidelityset
12.Ricecooker
13.Refrigerator
14.Vacuumcleaner
15.Immersionwaterheater
16.Kettle
17.Washingmachine
18.Tablelamp/standinglamp
19.Toaster,grill,roaster,hotplate,deepfryer,wokandsimilarappliances
20.Anyotheraudioproducts
21.Wallfan/ceilingfan
22.Adaptor
23.Mobilesplitair-conditioner
24.Coffeemaker,slowcooker,steamboatandsimilarappliances
25.Laserdiscset
26.Mixer,blender,mincerandsimilarappliances
27.Aircooler
28.Homecomputersystem(inclusiveofmonitor,printer,speakerandothermainsoperatedaccessories
29.Decorativelightingfixture
30.Portablecookinggasappliance
31.Gascanister
32.3-pinrectangulartype13-ampmainsplug
33.Fuse(lessthanorequalto13-amp)foruseinmainsplug
34.3-pinroundtype15-ampmainsplug
35.Multi-wayadaptor
36.3-pinportablesocket-outlet
37.Portablecablereel
38.Instantaneouselectricwaterheater
39.Mainspressureelectricstoragewaterheater
40.Residualcurrentcircuitbreaker
41.3-pin13-ampsocket-outlet
42.3-pin15-amproundtypesocket-outlet
43.Domesticelectricwallswitch
44.Ballastfortubularfluorescentlamp
45.Isolatingtransformerfordownlightfitting
Matters needing attention:
1. Each certificate can only list one model. Therefore, every model of the supplier's product must be registered, and obtain the certificate of conformity (COC) issued by the authorized conformity assessment agency (CAB) or authorized overseas agency (MRA).
2. The new registered supplier shall provide the following documents to the security authorities at the time of registration:
A. Formally fill in RS01 application form
B. Copies of the company's business certificate or of the registration certificate issued by the Industrial and Commercial Registration Agency (ACRA).
3. Safety signs are compulsory certification for controlled products
4. Because Singapore requires TRADEMARK not to be N/A, when applied, it can communicate with customers and make TRADEMARK with their company name. (CB report may not need to be managed, that is, there is no TRADEMARK, CB report can still write N/A, but do Singapore application must be TRADEMARK)
